Combined 200 Bhp Gas Boiler

Combined 200 Bhp Gas Boiler

Recently, the Hebei Langfang municipal government office "ten policy measures to support Hebei Province to promote the transformation of key industries and Ultra Low Emission Boiler (depth control)," according formulated and issued a "Langfang City to promote the transformation of key industries and Ultra Low Emission Boiler (depth governance) policy measures to support ten "(the" measures "), and comprehensively promote the iron and steel, cement, glass and other key industries and the transformation of ultra-low emissions of pollutants combined 200 bhp boiler, boiler-fired power plant pollutants depth governance.

"Measures" mentioned, strictly implement the "smooth approval of the green channel" to further deepen innovation and entrepreneurship, service development, people's livelihood-oriented "double hit double service" activities, enhance the quality and speed double simplify the above key industries and boilers the transformation of ultra-low approval procedures ultra-low emissions of air pollutants and other projects, the implementation of government-supported environmental protection equipment investment tax credit policy. The strict implementation of the relevant departments of the Ministry of Finance and other five, 10% of investment in environmental protection equipment mortgaged year corporate income tax liability; subsidies to varying degrees according to differences in the concentration of atmospheric pollutant emissions enterprise latest boiler equipment. For complete depth reduction of atmospheric pollutants and acceptance of coal-fired power and stable operation,

1, lower than the pollutant emission standards of the national and local pollutant emissions taxable value of atmospheric concentration of 30%, 75% reduced rate of levy environmental taxes;

2, lower than the pollutant emission standards in the country and 50 percent of local emissions of the taxable value of atmospheric concentration of pollutants, reduced rate of 50% levy environmental taxes.

"Measures" requirements, to strictly implement the "smooth approval of the green channel" system, continue to deepen the "double hit double service" activities, further upgrading speed, simplify examination and approval procedures, steel, cement, glass and other industries, ultra-low emissions of air pollutants boiler depth reform and governance project pollutant coal power plant; to implement environmental protection equipment investment tax credit policy, to carry out the depth of air pollutants emissions coal power plant, ultra-low emissions transformation of iron and steel, cement, glass and other enterprises and boiler emissions reconstruction project, the Ministry of Finance and other five departments to strictly implement the relevant documentation requirements, the implementation of a 10% investment in environmental protection special equipment to deduct year corporate income tax liability; to implement environmental protection tax relief, to complete the transformation of ultra-low emissions and acceptance stable iron and steel, cement, glass and other enterprises and boiler and emission reduction projects running, complete air pollutant emissions by coal-fired power plants deep acceptance stable operation of the emission of pollutants below the taxable value of atmospheric concentration of pollutants prescribed by the state and local 30% of the emission standard, reduced environmental taxes levied 75%; emission of air pollutants concentration value lower taxable National and local regulations on pollutant discharge standards of 50%, 50% reduced rate of levy environmental taxes; to guide benchmarking upgrading strict iron and steel, cement, glass and other industries, the transformation of air pollutants and ultra-low emissions coal-fired boiler power plant emissions of pollutants EIA depth governance project approval, strict implementation of Hebei Province on ultra-low emissions of iron and steel, cement, glass and other industries and atmospheric pollutants boilers, coal-fired power plant emissions depth local standards. To carry out the EIA approval, pollution permits, environmental supervision and law enforcement services double forward, promote cleaner production, guide enterprises to upgrade pollution control facilities, strengthen fine management, promote the production of green, clean; to give priority to conduct emissions trading . Start as soon as the secondary market trading emission rights, to carry out the depth of emissions of air pollutants and ultra-low emissions of coal-fired power plant transformation iron and steel, cement, glass and other enterprises, boilers and emission reduction projects, the formation of sulfur dioxide, nitrogen oxides emissions amount, priority emissions trading, emission reduction achieved early, early benefit, large reduction, big benefit; promote emission right mortgage loan; to recommend inclusion of advanced technology directory; the implementation of differential pricing policy; to implement load shifting production of differentiated management , in accordance with provincial requirements for stability and achieve ultra-low emissions standards acceptance iron and steel, cement, glass and other enterprises and boilers, as well as in-depth treatment and complete acceptance by coal-fired plants, the implementation of green scheduling, in accordance with the relevant policy requirements appropriate to reduce or avoid peak load shifting production to heating season; to support the selection of units involved in green, continued to improve air quality, and resolutely fight win battle of blue sky.

Three kinds of ventilation combined 200 bhp boilers often used at runtime to be continuously supplied to the boiler the combustion air required, and the resulting flue gas continuously drawn, a process called draft process of the boiler. Once the venting is stopped, the boiler will stop running; usually mechanically ventilated, i.e., by means of a pressure head generated by the fan to overcome smoke flow resistance of the duct. Mechanical ventilation currently used in the following three. A negative pressure ventilation chimney addition to using, the former also mounted chimney draft fan to overcome the resistance of all of the smoke, the air duct. This small capacity of ventilation, smoke wind resistance is not so large boiler system is more applicable. Second, while a balanced draft and induced draft fan blower mounted in the boiler smoke, air system. Port to the suction passage into the furnace from the wind (including through an air preheater, and a fuel combustion device layer) overcome the resistance of the entire duct fan; furnace outlet to the outlet stack (including a negative pressure outlet furnace, boiler slag tube after anti heating surface portions of the device and the dust removal) all by flue draft fan to overcome the resistance. This ventilation can effectively into the air, and the furnace flue boilers and all run under negative pressure, boiler room of the safety and health conditions better. If compared with negative pressure ventilation, boiler air leakage is small. Currently in heating boilers, the most balanced ventilation. Third, the only positive draft blower mounted in the boiler smoke in the air system, with its head against the resistance of all the smoke duct. Then the furnace and flue boiler are all working under pressure, and thus the furnace wall and door units are required tightly sealed to prevent leakage of flames and smoke high temperature hurt. This ventilation improves the strength of the heat of combustion furnace, boiler smaller volume equivalent capacity. By eliminating air leakage boiler furnace, flues, and improve the thermal efficiency of the boiler. Positive pressure ventilation, currently has applications in the oil and gas boilers. Boiler draft ventilation is generally balanced and positive pressure ventilation. These are the three common boiler ventilation method, in the process, to constantly add fuel, while also promptly clean up the burned ashes.

How to improve the thermal oil combined 200 bhp boiler efficiency oil boiler thermal efficiency is a lot of users are taken into account, we believe that this issue is the direction of each used in the production of various types of oil boiler manufacturers have been in the study. Many users at the time of the oil furnace to operate, often in the actual production process, we found some new problems, but all the problems, the headache is higher oil boiler flue gas temperature, low thermal efficiency the phenomenon that a serious impact on our work, then how should we do to improve the thermal efficiency of it? need to understand this is to meet the low-temperature characteristics of the thermal oil comes as synthetic heat transfer oil. However, the vast majority of synthetic HTF complex biphenyls, benzene derivatives of both components, or a vapor of volatiles has strong carcinogenicity, it is strongly recommended to select customers conducting oil mineral oil products. Second, conducting oil products to meet the low temperature performance process, but also have a relatively high flash point required. In general, oil engineers suggest, low flash point not lower than the HTF opening 200 ℃. After a professional manufacturer of continuous research and improvement of its equipment, in order to improve its thermal efficiency was found to be increased oil boiler heating surface of the tail, say, air preheater and economizer. But when organic heat carrier furnace return temperature is high, you can not set the economizer, air preheater can only be set to alleviate the situation. So if the oil boiler and not other low-temperature heating system heat exchanger, then the only way to improve energy efficiency is adding air preheater. After adding air preheater can be a corresponding increase in the flow rate of heat-conducting oil, oil boiler in order to ensure safe, reliable and stable work, the thermal efficiency of the boiler plant with thermal oil will be a corresponding increase.

Different meaning of the data and the oxygen content of the exhaust gas fired combined 200 bhp boiler: A boiler oil-fired boiler which, it is explained below target, because through knowledge and understanding of this kind of boiler, can broaden everyone's knowledge, and at the same time, familiar with the different boiler type, so as to achieve a comprehensive understanding of the boiler, do not miss any of which. 1. fuel boiler, 0.5 tons and 0.35mw, its meaning is the same as you? An oil boiler, and 0.5 tons 0.35mw these two parameters, which specifically refers to, and is not the same, because the former is the rated evaporation of the boiler, while the latter refers to the rated power of the boiler or the rated for heat. In addition, in the unit, the two are not the same. So, obviously, on this issue, that the answer is not the same. 2. Industrial boilers, oil-fired boiler is why the general level? In addition, the oxygen content in the exhaust gas boiler fuel, how much is more appropriate? Industrial boilers, if its use is oil-fired boiler, then, it generally is a Class B boiler, that is, the pressure of the boiler is rated at 2.5MPa or less. Oil-fired boiler exhaust gas oxygen content and, in general, is controlled within the range of 3% to 5% is appropriate. If less than 3%, the problem of incomplete combustion occurs.

Free Chat

About Us

Contact Us