Steam fired boiler manufacturer in ukraines and thermal oil heaters which is better? Which is more energy-efficient? Steam boilers and thermal oil heaters, which is more fuel cost savings? At the same power (represented with evaporation) for comparing the boiler, HTF medium because of the high temperature, so that the temperature of the steam exhaust gas temperature than the exhaust gas with a higher heating power of the boiler, the exhaust gas temperature directly affects Thermal efficiency. That same power (represented with evaporation) conditions, the efficiency is not high efficiency oil boiler steam boiler. In fact, now you finally choose what kind of boiler is required to rely on the temperature of your decision. If you ask a medium temperature to 300 degrees, you can only choose oil furnace; if you think there is a live medium temperature of 180 degrees is enough to use, it is recommended that you choose a steam boiler, because it is more energy-efficient with conditions). These are the kind of steam boilers and thermal oil heaters and today we analyze all the information of more energy-efficient, and the above information indicates that the steam boiler more energy saving, more fuel-efficient.
When long-term disabled fired boiler manufacturer in ukraine, furnace should pay great attention to external corrosion and maintenance problems. First, the boiler shutdown cooling, heating surface must be thoroughly cleaned and the fouling of the upper grate, the lower portion of the furnace ash. Then to maintain a certain degree of natural ventilation flue. In general, in order desiccant moisture should be placed in the furnace, flue. The quicklime as a drying agent, within the furnace or flue gas per cubic meter should be placed generally about 3kg. After placing all the ventilation should be tightly closed doors. After the change of lime powder to be replaced. Low-lying position as boiler room, ground during shutdown severe flood tide, often approach should be used and placed a small fire to dry desiccant combination. If the boiler shutdown a long time, after the complete removal of soot coated with an anti-corrosion red lead paint in oil or other metal surface furnace.
"APH T6" fired boiler manufacturer in ukraine circuit to meet the various needs, select single or series and parallel, with the use depending on the circumstances. Premix combustion technology with technology and wings, by fine adjustment control, to promote efficient mixing of gas and air, the combustion more fully, more efficient, suppressing the generation of NOx from the source. Beijing new boiler The boiler NOx emissions less than 18mg / m3, well below the most stringent in the history called "boiler air pollutant emission standards" under the implementation of emission limits 30mg / m3 of.
Reform technology of coal-fired fired boiler manufacturer in ukraine combustion mode retrofit of coal-fired boiler by means of this technology, proper pulverized coal can be injected into the proper position of furnace chamber, and appropriate suspended combustion can be added on the basis of furnace row layer combustion, which can achieve a certain energy saving rate. For fuel oil and gas-fired boilers, the old and backward burners can be replaced by new energy-saving burners.Free Chat
Copyright © 2020.Company name All rights reserved.